5 Takeaways That I Learned About Wood

Wood Preservation Methods

The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. The wood is checked against the other materials properties, performances, value, and work-ability. Wood has many advantages and this technology takes the advantages and utilizes them. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Once a tree has been cut down another can be planted in the same spot. Timber can be utilized in very many applications, and this makes it more valuable.

The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. Wooden structures have to be kept away from water and pests that eat through the wood. The rotting and decay of the timber products are caused by the moisture and the insects. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. As the name implies the preservative is made of copper products. Although being a good method to use for wood protection it has presents some few challenges. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.

Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. A high-pressure liquid that has the copper metal mixed in it is driven into the wood. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. The characteristics of the wood are highly improved and the when this process is used to treat wood. The wood products protected using this method last longer.

Termites cannot eat through timber treated through this method. It is not corrosive to metals used in together with the product. When you use this method to treat wood, then you will not need to worry for at least ten years.